A Power Requirements

 

(1) When using an induction cooker, it is necessary to use a three hole socket with a ground wire that meets various technical indicators (using products with CCC logo). It is not allowed to replace a two hole socket without a ground wire on your own, because the plug of the two hole socket is easy to loosen, not firm, and does not comply with national standards, which can easily cause instantaneous ignition, increase current, and be more dangerous.

(2) Do not place the socket directly above the induction cooker to prevent heat from rising and burning the power supply.

 

(3) If there are electrical appliances that are prone to sudden and frequent changes in current, such as welding machines, impact drills, hammers, or other high-power appliances, such as refrigerators, washing machines, water heaters, etc., used together with induction cookers, it is more likely to damage the induction cooker. Attention should be paid to using a plug-in board with overcurrent protection devices or using a stable power supply. Do not use or try not to switch on other electrical appliances while the induction cooker is working, to avoid damaging the induction cooker.

 

Heat dissipation of induction cooker B

 

During the operation of the induction cooker, there is a certain temperature inside the body. In order to make the induction cooker play a better role, work normally, and extend its service life, this heat should be discharged in a timely manner. Therefore, it is advisable to place the induction cooker in a position that is conducive to air circulation and heat dissipation.

 

Cleaning of C induction cooker

 

1. Please unplug the power cord before cleaning.

 

2. When the panel is dirty or discolored due to oil stains, please use cleaning powder, toothpaste, or car wax to wipe it off, and then wipe it clean with a towel. When the body and control panel are dirty, wipe them with a soft wet cloth. For oil stains that are not easy to wipe, use a neutral detergent to wipe them off, and then use a soft wet cloth to wipe until no residue is left.

 

3. Do not rinse directly with water or brush in water.

 

4. Regularly keep the body clean to prevent cockroaches, insects, etc. from entering the furnace and affecting the body's malfunction.

 

5. The suction/exhaust hood can be disassembled and cleaned directly with water or dust can be removed with a cotton swab, or it can be removed with a toothbrush and a small amount of cleaning agent.

 

D has encountered unexpected situations

 

If abnormal shutdown or alarm is found during the use of the induction cooker, it must be stopped immediately and the manufacturer's maintenance department should be contacted and consulted in a timely manner. If any problems are found, professional maintenance personnel should be consulted for handling. Do not disassemble it on your own.

 

Collection of E induction cookers

 

When the induction cooker is not needed for a long time, the first thing to do is to wipe it clean, air dry the body, and store it. Do not store it in a damp environment. Instead, place it in a dry place and try to put some desiccant and cockroach medicine inside the packaging to avoid squeezing and reuse